Story Page

This page will show you our pro class body mounts

For our pro stock trucks, pro stocks and pro mods we use Velcro on the sides, the rear license plate area is notched in the bodies with a cut off wheel dremel, the wheelie bars then set down in the body to lock the back of the body from coming down too low. The front wheels are glued to the chassis, and this is your front end height adjustment. The pro mods and trucks use a plastic dowel post to stop the front end from coming down too low. The funny cars have plastic glued to the front of chassis, and a 2-56 set screw attaches the body to chassis, in the back we drill a hole, then tap a 2-56 screw hole to in rear of chassis, mounting it to the plastic mount piece glued under the back window. The dragsters have a 40 thou plastic piece glued to the front of chassis, you then tap it with the 2-56 tap, drill a hole in drivers gut, where the 2-56 screw will go down to mount to the chassis underneath, the back magnet clip is drilled and tapped with a 2-56 tap as well, drill a hole in back of body just behind the plastic motor and mount a 2-56 screw through it.